3d Print Settings for Sovol SV01

Cura settings for fine detail parts so they are easily removable

  • Profile
    • Starting profile: Fine 0.1mm
  • Support
    • Generate Support: Yes
    • Support Structure: Tree
    • Support Placement: Touching Buildplate
    • Support Overhang Angle: 50
    • Tree Support Branch Angle: 45
    • Tree Support Branch Distance: 1.5mm
    • Tree Support Branch Diameter: 1.5mm
    • Tree Support Branch Diameter Angle: 5
    • Tree Support Collision Resolution: 0.1mm
  • Build Plate Adhesion
    • Build Plate Adhesion Type: brim
    • Brim Line Count: 5
  • Material
    • Printing Temperature: 190
    • Build Plate Temperature: 60
    • Build Plate Temperature Initial Layer: 70
  • Infill
    • Infill Density: 100 (but adjust according to size)